13. March, 2023 | Exposed articles, Science and expert articles
Development of the hydraulic system of the Stewart platform Jan Pustavrh, mag. inž. str., doc. dr. Aljoša Peperko, prof. mat., doc. dr. Franc Majdič, univ. dipl. inž.; vsi Univerza v Ljubljani, Fakulteta za strojništvo Povzetek:The Stewart platform allows simulation...
27. December, 2022 | Exposed articles, Science and expert articles
Compatibility of filtering materials with ionic hydraulic fluids Prof. dr. Darko Lovrec, univ. dipl. inž., Univerza v Mariboru, Fakulteta za strojništvo Abstract:Efficient filtering is often crucial in the field of machines and devices, as the safe, reliable, and...
27. December, 2022 | Exposed articles, Science and expert articles
Development of miniature proportional hydraulic valve to control the movements of a humanoid robot Dominik Božič, Franc Majdič, Fakulteta za strojništvo, Univerza v Ljubljani Abstract:To control a hydraulic humanoid robot, it is necessary to design and optimize a...
20. November, 2022 | Exposed articles, Science and expert articles
Development and practical use of premium hydraulic oil on mineral basis Dr. Milan Kambič, univ. dipl. inž., Olma, d. o. o., Ljubljana Abstract: In the introduction of the paper, the requirements encountered in modern machines and hydraulic equipment will be stated....
20. November, 2022 | Exposed articles, Science and expert articles
Nonlinear velocity control of electrohydraulic rotational servo system Doc. dr. Mitja Kastrevc, univ. dipl. inž., doc. dr. Edvard Detiček, univ. dipl. inž., oba Univerza v Mariboru, Fakulteta za strojništvo Abstract:This paper studies the closed-loop control of an...
1. September, 2022 | Exposed articles, News
Designing, manufacturing and testing of proportional 3D-printed hydraulic directional control valve with topology optimization Jan Bartolj, dipl. inž., dr. Ana Trajkovski, univ. dipl. inž., oba Univerza v Ljubljani, Fakulteta za strojništvo; mag. Anže Čelik, univ....
3. August, 2022 | Exposed articles, Science and expert articles
Business and technological aspect of process informatization and automation in industrial practice Doc. dr. Mitja Cerovšek, univ. dipl. inž., Iskra PIO proizvodnja industrijske opreme, d. o. o. Šentjernej Abstract: Digital transformation brings great technological and...
3. August, 2022 | Exposed articles, Science and expert articles
Load-bearing lattice structures and segmentation Dr. Pavel Tomšič, univ. dipl. inž., Univerza v Ljubljani, Fakulteta za strojništvo Abstract: Due to their simplicity and versatility, load-bearing lattice structures allow construction in hard-to-reach areas, as they...
11. May, 2022 | Exposed articles, Science and expert articles
Testing the impact of light conditions on image quality for optical inspection of surface defects Research Fellow George Cordoyiannis, PhD, Senior Lecturer Iris Fink-Grubačević, MSc, both Faculty for Industrial Engineering Novo mesto; Assistant Prof. Tomaž Savšek,...
11. May, 2022 | Exposed articles, Science and expert articles
A setting of accelerometer’s parameters for prevention of impacts and movements of washing machines at low rotational speed of drum Aleš Rosenstein, dipl. inž., Univerza v Mariboru, Fakulteta za strojništvo, doc. dr. Timi Karner, mag. inž., Univerza v Mariboru,...
